M10
A customer-exclusive cordless vacuum pump already in production. Available for sales in China; shown overseas only as a design and manufacturing capability case, not for procurement, private labelling or distribution.
A compact vacuum pump design in development. Explore the form, colour direction and potential for joint development.
Exterior & structural IP protection
In developmentColour directions and scene visualisations. Final colours and details are confirmed against an approved sample.
Design-stage dimensions. The development configuration specifies a 1800 mAh battery and an approximate 21-minute runtime reference; performance remains subject to prototype validation.
Images are design visualisations. Final tooling, materials and production appearance are agreed during development.
Tooling has not yet begun. Final configuration and performance remain subject to engineering and prototype validation.
Runtime is an approximate manufacturer reference, not a continuous-operation claim. Actual duration varies with operating mode, load, sealing, valve fit, battery condition and use conditions.
The warm glow shown inside the button bezel is a design visualisation. Its final colour, brightness and control behaviour will be confirmed during development.
S10 explores a softer visual language for vacuum storage. Rounded shoulders, a compact cylindrical body and a framed front control create a cohesive appearance. Low-saturation colour studies extend the idea into different home settings, with the emphasis on proportion, surface finish and a consistent relationship between the upper and lower sections.

A matte ABS body with rounded shoulders meets a metallic-finish control. The logo sits low on the front, keeping the face composed. Warm light on the inner side of the button bezel adds a focused visual detail.
S10 has not yet entered tooling. Final details and light appearance require engineering and prototype validation.
A 90 mm profile with a nominal Ø56 mm body. Beside an upright ID-1 card at the same scale, S10 is approximately 1.05 times the card’s height.
Upright ID-1 card: 85.60 × 53.98 mm. Both objects share one baseline and one millimetre scale. Nominal design dimensions are shown.
View full size graphic
The exterior design and internal structure of this project are subject to intellectual property protection. Unauthorised copying, imitation, commercial manufacture or sale incorporating the protected designs is prohibited.
The scope of rights is defined by the relevant intellectual property documents. Contact NULORA for joint development or licensing.
Discuss authorised collaboration