All models
Vacuum. Inflate. Illuminate.

D10

Three functions. One considered direction.

A development programme combining vacuum extraction, inflation and an integrated light source in a portable form. Explore the design and discuss an authorised development partnership.

Vacuum + inflationIntegrated light conceptJoint development
Exterior & structural IP protection

Key specifications

Function
Vacuum + inflation + light
Dimensions
Ø45 × 115 mm
Battery
1800 mAh
Runtime reference
Approx. 21 min
Configuration & use notes

Exterior reference dimensions include the cap. The design is under detail review and is not an engineering release for tooling.

The development configuration specifies a 1800 mAh battery and an approximate 21-minute pumping runtime reference. Vacuum extraction, inflation and integrated lighting remain subject to engineering and prototype validation; this is not a separate lighting-runtime specification.

Tooling has not yet begun. Final configuration and performance remain subject to engineering and prototype validation.

Runtime is an approximate manufacturer reference, not a continuous-operation claim. Actual duration varies with operating mode, load, sealing, valve fit, battery condition and use conditions.

The in-hand, storage and lighting scenes are design visualisations. They illustrate intended settings and appearance, not measured extraction, inflation or lighting performance.

Use & product informationExplore practical guidance, demonstrations and development information.
D10 / DESIGN NOTES

Vacuum, inflation and light, considered together.

D10 brings vacuum extraction, inflation and an integrated light source into one development direction, using a taller cylindrical proportion and clearly defined sections. The green upper and lower areas frame a contrasting light-coloured centre, while a paired front control adds a horizontal counterpoint. The current exterior study concentrates on the top profile, transitions between surfaces and the balance of colour across the complete body.

  • Vacuum + inflation
  • Integrated light
  • Sectioned form
D10 / THREE FUNCTIONS, ONE DIRECTION

Pack smaller. Explore a little further.

A portable development design bringing vacuum extraction, inflation and an integrated light source together. Green upper and lower sections frame a white centre, with two front controls giving the functions a clear visual order.

  • Vacuum extraction
  • Inflation
  • Integrated light design
Development battery specification
1800mAh
Pumping runtime reference
~21min

Approximate pumping reference only. Lighting runtime remains to be validated. Actual duration varies with operating mode, load, battery condition and use conditions.

Discuss D10 development
D10 warm-light concept rendering on a balcony table at dusk
LIGHTING CONCEPT RENDERING

A visual exploration of the integrated light source. Shown illumination is illustrative, not measured performance.

D10 has not yet entered tooling. Renderings show design intent; final configuration and performance require engineering and prototype validation.

D10 / A CLEAR SENSE OF SCALE

115 mm tall. Easy to picture.

Compare the complete silhouette with an upright card reference. D10 is approximately 1.34 times the card’s height, with both outlines drawn to the same scale.

Height including cap
115mm
Body diameter
Ø45mm

Exterior design reference. The simplified silhouette illustrates size and appearance, not engineering geometry.

Simplified D10 exterior dimensions: total height 115 millimetres including the cap, body diameter 45 millimetres.NULORA115Ø45115 mmØ45 mm
115ר45

Height × diameter · mm

Generic ID-1 card reference: 85.60 × 53.98 mm, upright on the same baseline and at the same millimetre scale.

D10 / DESIGN & STRUCTURAL IP

Protected design. Rights reserved.

The exterior design and internal structure of this project are subject to intellectual property protection. Unauthorised copying, imitation, commercial manufacture or sale incorporating the protected designs is prohibited.

The scope of rights is defined by the relevant intellectual property documents. Contact NULORA for joint development or licensing.

Discuss authorised collaboration
/ PRODUCT FILM

Manufacturer demonstration. Results vary with bag size, contents, sealing and valve fit.

A closer comparison.

Model
Status
Function
Runtime reference
Market scope
Material
Dimensions
Battery
Input

Development figures are design references. KZ-001 and MRS-001 runtimes are cumulative references with approx. 2-min auto-off, not continuous operation; restart to continue. Confirm the selected configuration and samples before ordering.

Help me choose